Blinking unless using full ON

So I was super excited to change all my dimmer switched to Caseta Wireless dimmers, sadly I'm having a deal breaker of an issue...

Video of what I am experiencing
https://photos.app.goo.gl/X3sD6WagiQDeXSFY9

Basically, If I turn off the lights with the bottom button, they dimm all the way down and it's fine.
If I use the dimm up button, the LEDs continually flash.
If I use the top button, there's an initial blink, as it dimms up, once it has reach the top level, the LED remain on

Is there anything I can do for this? I've seen a video on youtube where the poster in the comments says he used the LUT-MLC and it fixed his problem?
Here is the video :
https://www.youtube.com/watch?v=yRpcbXH_KO8

Check to make sure the dimmer and LED are compatible. Lutron does some testing (lutron.com/led). The LED manufacturer should have a list of recommended dimmers.

You can try adjusting the trim. Instructions are here:
http://www.lutron.com/TechnicalDocum...structions.pdf

Use a dimmer with a neutral connection. The 6WCL is good for screw-in bulbs but the 10NXD is better all the way around.

Quote:

---

Originally Posted by randyc

Use a dimmer with a neutral connection. The 6WCL is good for screw-in bulbs but the 10NXD is better all the way around.

---

Ok, I will go get a 10NXD and try that one!

Quote:

---

Originally Posted by randyc

Use a dimmer with a neutral connection. The 6WCL is good for screw-in bulbs but the 10NXD is better all the way around.

---

Thanks for the tip, I bought 4 10NXDs Saturday and installed them and everything is working great!