Vive system with pick and rmjs-16r-dv-b dimming module
Today I installed a few rmjs-16r-dv-b dimming modules controlled by some pico remotes. They are controlling some 40 watt LED flat panels. (This is on a commercial building.) The first room has two modules and two picos, each controlling 10 fixtures. They work correctly. The next room has one module and one pico controlling 3 lights and one module and 3 picos controlling 9 lights. The lights will not turn off completely. They are dimmed very low. The next four rooms are doing the exact same thing. I have tried everything I know to do...1. Switched wires2. checked for loose connections on the 10vdc wires3. Added lights to increase the load. 4. Added them to the vive hub and tried to adjust the Low trim 5. Tried to turn off using the RMJS button6. Tried resetting factory settings to the RMJS7. Checked for loose neutrals8. Checked for stray voltagesI spent over four hours today and 4 out of the 5 rooms will not turn turn completely off. Any advice will be greatly appreciated.Thanks,Peacemaker
Lutron Caseta and Lutron RMJS-8T-DV-B Vive PowPak Dimming Module
I don’t believe the Vive PowPaks are compatible with Caseta. They work with Pico remotes, some occupancy sensors, and the Vive hub only as far as I know. Unfortunately the Vive hub is really expensive...over $1000 US