Extracting project from 2 HW 8series interconnected

Hi,
please how can we extract a project from a system with two HW 8series interconnected? I don't have any backup and I must create a project with two processors
is there any docs?
thanks a lot

in other way, how to extract files in multi processor job?

techniquesmethodes,

To extract you must create a new file with the two HW 8-Series processors. Once you have the two processors in the file and addressed then you will need to connect to them in terminal. Once you establish a connection in terminal you can then go to File>Extract Project on the Terminal screen. After the extraction is successful you will need to save the file.

thank you Kevin,
how to create a file with two HW 8series processors? is there any documentation

no help :-(

Using the HomeWorks Illumination software you would need to create a new project file. Then in the panel assignment screen you would need to add the proper panels that the processor go into. After the panels are added you would add a processor into each panel. For assistance on adding the proper panel and processor into the project file please refer to the help file that is included in the software.

thank you very much