-
Grafik Eye Integration
Hello everybody.
If I have an existing single-room Grafik Eye 3106 installation and want to integrate it into a new Homeworks 4/8 series whole-building installation by connecting it to a dedicated Grafik Eye/WPM communication link, what is going to happen with the existing GRX wallstations? Can they
1) remain connected to the Grafik Eye
2) have to be connected to a dedicated keypad link or
3) are they redundant in a Homeworks system?
thank you,
Harry
-
If you have an available slot on the GRX/WPM link on the HomeWorks Illumination system, you can do the following:
- Go into programming in the GRX and assign it an address
- In the software, add a GRX and link assign it to the same address given to the GRX you want to integrate
- Program to it in the software
- Perform an upload to the system
Both the GRX keypads and the HomeWorks Illumination system will be able to control the GRX.
-
So the GRX keypads remain directly connected to the Grafik Eye and don't have to be rewired to a HWI keypad link?
regards,
Harry
-
That is correct, but these keypads will not be able to control anything outside the GRX they are wired to.