Occ sensor issue.

I have a LRF2-OCR2B-P occ sensor that is driving me up a wall.Homeworks QSActivatesTakes programming transfers"Test" button functions properly (sees motion and turns on the orange LED)Does noting else! Won't function as an Occ sensor or Vacancy sensor."Light" button on the unit does not toggle load its attached to via programming.I've checked and triple checked all the settings on the device itself (Auto On, Activity, Timeout).Can't find any documentation on factory defaulting the unit.Help!

Sorry this looks like a 1st grader wrote it. I had done those in list format, and the board jammed them all together.

Quote:

---

Originally Posted by AndyM

I have a LRF2-OCR2B-P occ sensor that is driving me up a wall.Homeworks QSActivatesTakes programming transfers"Test" button functions properly (sees motion and turns on the orange LED)Does noting else! Won't function as an Occ sensor or Vacancy sensor."Light" button on the unit does not toggle load its attached to via programming.I've checked and triple checked all the settings on the device itself (Auto On, Activity, Timeout).Can't find any documentation on factory defaulting the unit.Help!

---

The formatting has been a know issue for some time. We won't hold that against you.

This is a link for changing the transmitter frequency. It sometimes helps with the issue you are describing.

http://www.lutron.com/TechnicalDocum..._Procedure.pdf

Worked! Thanks!