HVAC Commands Action# 18 & 19?

Why is there nothing about these actions in the Integration Protocol documentation?

Code:

---

Line    20 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: STR-[ ~HVAC,37,18,70.50,6.50,6.50$0D$0A~HVAC,37,19,21.39,3.61,3.61$0D$0A ] :DEBUG<1491>
Line    21 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: fnTrimFront Returning-[ ~HVAC,37,18,70.50,6.50,6.50$0D$0A ] :DEBUG<3062>
Line    22 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: cStrTmp returned from trim-[ ~HVAC,37,18,70.50,6.50,6.50$0D$0A ] :DEBUG<1507>
Line    23 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 1 ], VAL-[ ~ ] :DEBUG<1548>
Line    24 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 2 ], VAL-[ HVAC ] :DEBUG<1559>
Line    25 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 3 ], VAL-[ 37 ] :DEBUG<1559>
Line    26 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 4 ], VAL-[ 18 ] :DEBUG<1559>
Line    27 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: DATA-[ 1 ], VAL-[ 70.50 ] :DEBUG<1564>
Line    28 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: DATA-[ 2 ], VAL-[ 6.50 ] :DEBUG<1564>
Line    29 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: DATA-[ 3 ], VAL-[ 6.50 ] :DEBUG<1581>
Line    30 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): HVAC, INDEX-[ 1 ], MATCHED INTEGRATION ID-[ 37 ], ACTION-[ 18 ] :DEBUG<1751>
Line    31 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: fnTrimFront Returning-[ ~HVAC,37,19,21.39,3.61,3.61$0D$0A ] :DEBUG<3062>
Line    32 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: cStrTmp returned from trim-[ ~HVAC,37,19,21.39,3.61,3.61$0D$0A ] :DEBUG<1507>
Line    33 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 1 ], VAL-[ ~ ] :DEBUG<1548>
Line    34 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 2 ], VAL-[ HVAC ] :DEBUG<1559>
Line    35 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 3 ], VAL-[ 37 ] :DEBUG<1559>
Line    36 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: HEAD-[ 4 ], VAL-[ 19 ] :DEBUG<1559>
Line    37 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: DATA-[ 1 ], VAL-[ 21.39 ] :DEBUG<1564>
Line    38 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: DATA-[ 2 ], VAL-[ 3.61 ] :DEBUG<1564>
Line    39 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): RX: DATA-[ 3 ], VAL-[ 3.61 ] :DEBUG<1581>
Line    40 2018-12-05 (18:38:28)::  LUTRON AXI DEBUG (1): HVAC, INDEX-[ 1 ], MATCHED INTEGRATION ID-[ 37 ], ACTION-[ 19 ] :DEBUG<1751>

---

Vining

I do apologize I am not sure where these commands are coming from. It looks like this is not from a terminal screen, but the processor logs itself. I would recommend emailing in a support file to hwsupport@lutron.com and we get a further look at this with you.

Yeah that’s a diagnostic printout from my AMX parsing routine. It’s not that big a deal since I can just ignore it. Just corious to know what the values represent. If I knew maybe I’d want to ise them.

- - - Updated - - -

Yeah that’s a diagnostic printout from my AMX parsing routine. It’s not that big a deal since I can just ignore it. Just corious to know what the values represent. If I knew maybe I’d want to ise them.