Printable View
I have read the white paper on integrating URC to the Lutron Caseta Bridge, Caseta products use the bottom button for teaching , the URC manual makes reference to the Lutron Maesrto line with a middle button for syncing. Should I assume Caseta is not possible, assistance appreciated, comments welcome.,
Anyone? I too am looking to see if I can use DemoPad with Lutron's Caseta system? Right now I have the native Lutron software installed, however I would rather like to have the ability to control my system from the remote's interface without having to roundtrip it back and forth when wanting to control something.
If you are looking to integrate Caseta with URC, you must have a Caseta Pro bridge (model #L-BDGPRO2-WH).
The Caseta controls can't be linked to URC without it.
You would set up the Caseta system via the Caseta app, and then use the URC drivers provided by URC.
@Brian W,
Does the Caseta Pro Bridge support "Telnet Control"? I inquired with the maker of the URC software I am using and they said if it supports telnet control it will work. Can you confirm this before I go out and purchase the Pro version.
Thanks
Yes, the Pro bridge suppotrs Telnet control.
In the Caseta app, go to Settings > Advanced > Integration, and make sure Telnet Support is turned on.
Quote:
Originally Posted by Brian W.
Lutron Caseta L-BDGPRO2-WH is this the correct model number?
Yes, L-BDGPRO2-WH is the correct model number Caseta bridge to work with URC.
@Brian W.Quote:
Originally Posted by Brian W.
Thank you!
What kind of URC control are you planning? Is it via MRX1 or 2? Isn’t that the only oiece with lan control?
@Brian W. - My entire home has Lutron URC dimmers. Does this mean that I can setup a Caseta Smart Bridge Pro and control my URC dimmers through it? End goal is to be able to get rid of the URC remote and use a smart phone.
Any info here is much appreciated!
Could you please supply the model number of these Lutron dimmers?
The model number will be on a sticker on the back of the dimmer.
Thanks for the prompt reply Brian W., much appreciated. All of the control units model #s are MRFA-600M-URC-WH.
That dimmer worked with a specific URC remote, but won't work with the Caseta system. The Caseta system uses a different RF frequency for communication.
Hi
I am new to this forum
the Lutron URC-mrfa dimmer has the 418mhz frequency, but the MRFB has the 434mhz frequency, does the Lutron Caseta L-BDGPRO2-WH combine this dimmer with the Caseta system without the URC programming software?
If I buy a Lutron MRFB dimmer (434mhz) when I press the dimmer button, will the Lutron app find it and associate it with the Caseta system?
thanks for reply
Attachment 865Attachment 866
Here are 2 photos of Lutron URC dimmers, thanks
Those were specific to URC and based off of RA Classic. They will not identify on any of the new systems. You may be able to get it to identify in URC, but I have no experience with that system. You could then program URC to add that to a Caseta scene, but the Caseta app will never control it directly.Quote:
Originally Posted by alnico
ThanksQuote:
Originally Posted by SDR-Mike
that's what I thought, and the programming of the URC software is quite complex,.