I am new here.
My client has HWQS installed with Pico keypad.
He wanted Control4 to be integrated with the existing system.
My question-
Do I need to get additional equipment before I could integrate Lutron with Control4?
Printable View
I am new here.
My client has HWQS installed with Pico keypad.
He wanted Control4 to be integrated with the existing system.
My question-
Do I need to get additional equipment before I could integrate Lutron with Control4?
Hi CharlesAaron, in order for Control4 to integrate with Homeworks QS all you will need is the integration drivers from Control4, you won't need any additional hardware on the HWQS side in order to integrate the 2 systems. Control4 will then send commands to the HWQS processor. You will need the Integration Report from the HWQS software. This is where you will get the integration ID's for the devices that are in HWQS system.
I had generated the report from HWQS but do not know the next steps in control4
Kindly assist
It's all done on the Control 4 side. There may be some C4 programmers here but you probably should contact Control 4.