Incrementing Event Indexes

Hi,

I’m having issues with Timeclock events on a system running firmware 8.2.

For this installation, I am utilizing Timeclock events to trigger system operations on another RTU connected via the RS-232 port.

My issue is related to the Timeclock’s Event Index. Every time I “Transfer” a new system configuration to the Main Repeater, the Event Indexes increments by one.

For example, I have three Timeclock events, and my integration report shows the following
Timeclock ID = 13
(Event, Event Index)
Test A, 1
Test B, 2
Test C, 3

I used a Data Logger to monitor the Timeclock events as they execute.

On my initial setup, I received the following results.
(Event, RS-232 String)
Test A, ~TIMECLOCK,13,5,1
Test B, ~TIMECLOCK,13,5,2
Test C, ~TIMECLOCK,13,5,3

After modifying the system using Radio RA2 Inclusive, I received the following results.
(Event, RS-232 String)
Test A, ~TIMECLOCK,13,5,1
Test B, ~TIMECLOCK,13,5,3
Test C, ~TIMECLOCK,13,5,0

As you can imagine this is causing many issues with my other RTU. Does anyone have an idea of the root cause?

Oops. I found an error. My second example should read the following.

After modifying the system using Radio RA2 Inclusive, I received the following results.
(Event, RS-232 String)
Test A, ~TIMECLOCK,13,5,2
Test B, ~TIMECLOCK,13,5,3
Test C, ~TIMECLOCK,13,5,0