0-10V adapter to phase dimming - RRD-6ND switch
We received a led linear suspension fixture with the following specs:
120-277VAC Input
Hot, Neutral, Ground, Dim+, Dim-
Non-Dimmable: Switch on or off
0-10V: Dim to 1%
The light fixture is line voltage, but the driver is not phase dimmable. I have a Ra2Select RRD-6ND dimmer switch for this light - what is the easiest way to make this work?
I came across this gimmicky adapter:
Responsiv Blink'n'Dim Adapter, Universal Dimmer for 0-10V Dimmable LED Fixtures, Retrofit Kits or Fluorescent Ballasts. Dim with Existing Switch. No New Wiring in Walls. Better Than Wireless.: Amazon.com: Tools & Home Improvement
I know Lutron has PowerPaks, but unsure which would work with the 5 wires > this would then need to be controlled by a Pico remote instead of the RRD-6ND dimmer?
The manufacture isn't making any concessions and doesn't have drivers or power supplies to make this work. Any advice would be greatly appreciated. Thank you.