Lutron Caseta Dimmer light stays on and won’t Dim
I am really confused. I have just had a house built with many Progress Lighting #p8107-28 ELV reverse phase LED lights. I installed a Lutron Caseta PD-6WCL on my 1-way switch outside lights, which includes 2 standard fixtures and also with 2 of the Progress lights and everything worked perfectly.
When I tried to install on a other switches (both a 1-way and a 3-way) that was just the Progress Light fixtures, it didn’t work. The lights just stayed on in a dim light and they would not dim or turn off.
I then tried the Caseta PD-5NE with the neutral wire to see if that would work. This time the lights stay on bright and will not dim or turn off. I changed it to the ELV mode with no change.
It seems as if I need a standard fixture on the same switch as the ELV fixture to get it to work properly. Anyone have any solutions?
I will try to explain again
Apparently I was not totally clear in my last message. I did try the PD-5NE. When connecting the ELV light fixtures to the PD-5NE for a one way switch and changed to the ELV mode. The lights just stayed on and the switch did nothing. When I switched the 2 black wires the Lutron switch would not turn off even with the FASS switch pulled out.