-
Programming of CCP Panel
We have a project already order the CCP Panel with XP Module 4S and TVM to control 0-10V LED, which device I can use in HomeWorks Lutron Designer? I can't find the 4S and try to add a 4R but can't to assign 0-10V zone to 4R, is it any programming guilde in the resourse website for program CCP Panel?
Thanks.
-
You will find the answer in the following thread. You can use the 4U in the software with the TVM.
https://forums.lutron.com/showthread...ighlight=panel
-
Thanks for your reply, Armando.
I have one more question, this is my first time to use HomeWorks QS to do the programming of CCP Panel, is the link assignment need to change to HWQS Power Panel and no need to activate the module? is it any link I can get more information about programe Panel?
Thanks.
-
2 Attachment(s)
Correct, the link in the software needs to be configured as a power panel link and the SPI or MI does not need to be activated. The SPI or MI do need to be configured to the correct address according to the software (1-16) and the modules need to have the correct address according to the panel placement in the software as well. This can be done via the rotary dials. See attached for processor links information and spec grade panel information.
-
Would you please be able to provide the part number of the CCP panel?