Looking for some real world feedback. There is a TON of this stuff out there on the market.
Can anyone recommend a flexible (relatively easy to cut to fit) LED tape and power supply setup that works (dimable) well in the Lutron world (6NA and RPMA)?
Printable View
Looking for some real world feedback. There is a TON of this stuff out there on the market.
Can anyone recommend a flexible (relatively easy to cut to fit) LED tape and power supply setup that works (dimable) well in the Lutron world (6NA and RPMA)?
You can go to www.lutron.com/ledtool and make a search to help determine what tape lights we have tested with our controls. You shoud put under "Fixture/Lamp Type" the "Cove Strip" lights. Under Lutron Control, you can put "HomeWorks Panel" which will give you test results for RPMs or "Ra2 / HWQS Dimmers" which some results can highlight the 6NA dimmers.
I installed some LED strips from elementalled.com with their magnetic dimmable drivers. 6NA dims about 40W of that LED strip without any issues.
I ordered a bunch of 24v 90+ CRI high-density tape from Super Bright LEDs dot com, along with aluminum channels and frosted lenses. Running them with Hi-Lume A-Series drivers from RR2 6NA dimmers. Works great and looks great. Only thing less than completely perfect is the high-density tape gets pretty hot if run above 80% -- fortunately 50% is very, very bright. I have used the A-Series drivers a couple of times in various situations and they are terrific, never had any dimming issues.