Feit LED lamps with a Lutron AYCL253P
I had my kitchen remodel completed last week. The electrical contractor installed 5 inch cans (7) for total wattage of 150.5. Each lamp was rated at 21.5 watts. The lamps, Feit CELEDRT56/9272, were on the Lutron list of approved lamps. From the start we have had a consistent buzzing coming from the lamps. I called the Lutron tech line and spoke to a specialist about the buzzing noise. He told me that the original dimmer that the contractor installed, an AYCL153P, was not the correct dimmer. He told me to install the AYCL253P since the wattage was higher than the AYCL153P and the lamps would not buzz. I ordered the AYCL253P and it came in yesterday. I installed it the same as the 153P and I noticed that the ground wire on the 153P was not connected. I did not connect the ground on the 253P but am still getting the buzzing from the lamps. Could the missing ground wire be the source of the buzzing problem or could it be something else? Any help would be greatly appreciated since the buzzing is extremely aggravating.