IOS App won't connect to Caseta Bridge
I have a brand new install (and about 25 years in the networking and computer industry :-). I connected the Bridge to the Ethernet port of my router and plugged in the power. The Bridge lights up so power seems OK.
After entering my login info, the Caseta app says "Discovering Smart Bridge..." then "Connecting to your Smart Bridge..." and then about a minute or two later says "Cannot connect to your smart bridge" and offers Cancel or Retry.
I can't find any troubleshooting docs or posts here covering this case. Fing doesn't show anything on the network that looks like it might be the Smart Bridge. No "Texas Instruments" devices, for example.
Help!
Fios, Orbi, iPhone Caseta Bridge Connecting Failed
Equipment-Orbi RB854K (1 Router and 3 Satellites)-Verizon Fios Quantum Gateway Router Modem (G1100)-Lutron Caseta Smart Bridge (L-BDG2-WH) and some Lutron Caseta switches-Apple iPhoneI have been successfully using my Orbi WiFi 6 System with my Verizon Fios Quantum Gateway modem (WiFi turned off) with the Orbi in AP mode. This includes connecting devices to my Orbi router and satellites via wireless and ethernet. The Lutron instructions indicate that the Smart Bridge needs to be directly connected to the Router via an ethernet cable. My first attempt connected the Smart Bridge to my Orbi Router and kept the Orbi Router in AP mode. The Smart Bridge was not recognized by the Lutron App (although the device did show as connected in the Orbi admin panel). I then switched my Orbi to Router mode and again was unable to have my Smart Bridge recognized by the Lutron app but it did show as connected in the Orbi Admin Panel. This switch also caused issues with my cable tv so I switched things back. I also used the advanced in the Lutron App to enter the IP address for the Lutron Hub showing in my Orbi panel and that too failed.How do I get the Lutron app to connect to my Lutron system and keep Orbi in AP mode? Right now my Lutron switches are nice dimmers with a remote but unable to be controlled by Amazon Alexa or my Logitech Harmony remote. Thanks in advance for any guidance provided.