J. Geiger Shades - Anyone have a sample program
This company J. Geiger makes some beautiful shades, but has a Frankenstein method of control.
They have Somfy motors and use a Crestron processor to receive RS-232 commands.
I've built a dummy program. I've added a QSE-CI-NWK, the Lutron device which enables RS-232 communication. Under "Configure Integration," I've added a selection of commands provided by J. Geiger. I can't find anywhere to add shade groups (though that may all happen on the J. Geiger side of the puzzle). In the HWQS program and I can't find anyway to send the commands I created.
Control Somfy RTS with QS
I am using the new QSX P7 HomeWorks QS processor and I like to control the Somfy RTS interface. What is the easy way to do this? Can I use just the B&B ethernet to RS232? OR do I need the QSE-CI-NWK device? On the designer QS software I think I need to create a telnet and the B&B or CI-NWK device will read by IP commands and send Somfy commands thru the RS232 output, but after I do some programming. I am correct ?