Can I power an RRD-W6BRL keypad from what used to be a 4 way switch?
RadioRA2 system. I had a 4 way circuit powering a group of recessed lights. It's got an RRD-6CL master dimmer at the load side, and had two remote dimmers at the other two locations. I pulled the middle remote dimmer which was wired up like a 4way switch, connected black to black, white to white, and swapped the white and load-black on the master dimmer. The lights work perfectly, and the black and white wires I connected in the middle location both read 120v with the lights on or off. But I tried connecting the RRD-W6BRL to that middle spot and just added the black wire to the black group, and white to white group but there seems to be no power to the keypad. I tried a second one (both brand new) and same result, no power. Is what I'm doing here not going to work?