Hi.
I see the new CL dimmers in Software 7.5. I am a bit confused as to when I should spec these vs the 6NA models. The software says the CL dimmers have a minimum load of 50W which in many cases is too high for almost all of the LED loads I am using. For example, we use many LED Strip lights with a dimmable driver which are rated at 1W per foot. In many cases, we are installing only 10 to 20' of these so the load on the dimmer is as low as 10W (my understanding). The 6NA's have worked well for this purpose now that we have found a good dimmable driver / LED strip manufacturer. However, I do like the lower price point of the CL dimmers.
Am I missing something? Doesn't the 50W minimum seem excessive?