programming occ/vac sensors for multiple levels on a schedule using Lutron software

I would love the ability to set schedule for occupancy sensor for level adjustments. i.e. hallway at 100% from 8am to 6pm; 50% 6pm to 11pm; 10% 11pm to 6am; 50% 6am to 8am.
I currently have 3 sensors on time clock events to do this disabling the alternate sensors leaving the one programmed at the level desired. Is there an easier way I am missing? I just am getting into the 8.2 inclusive software but have not seen that as an option.
If not, it would be glorious to add to the programming.

This can't be done under the Ra2 platform by itself. Third party would be able to pick up the sensor on/off commands and then activate a phantom button dependent on time.

Thanks so much, I was thinking backwards, doing way to much work without thinking it out. Using the occ/vac sensor to trigger the phantom button I want is soooo much easier.
Thanks again