Can I use any CFL bulbs with a PD-6ANS? The lights are not coming on with the 3-way setup, but the switch seems to be operating OK. Wiring is correct.
Printable View
Can I use any CFL bulbs with a PD-6ANS? The lights are not coming on with the 3-way setup, but the switch seems to be operating OK. Wiring is correct.
Yes, but you may need the MLC that came with it.
Provides an Easy Way to Control Your LightsQuote:
Originally Posted by HugoER
- Works with up to 720-Watt of Inc./Hal/ELV/MLV, 6 Amp of dimmable LED/CFL and 3.6 Amp of general purpose fans
- Lutron® patented Clear Connect® RF Technology works through walls and floors
- Neutral wire required — provides higher capacity and 10W minimum load or one LED bulb
- Minimum load cap included (for switching LED, CFL, and ELV loads)
- Switches always operate locally and do not require system control
- Uses Lutron® Claro® wallplates or designer-style wallplates from other manufacturers, (Wallplates are sold separately)