Re-Assigning DALI Ballasts

In Homeworks QS --- If I have a DALI loop with ballasts that have already been assigned, is there a quick way to move a ballast from one load to another? For instance, a group of 6 downlights was commissioned as 1 zone, and then the designer decides to take two of those downlights and make them a separate zone. It seems the only way would be to completely re-activate the entire loop? But I may not want to alter the other 62 remaining ballasts on the loop...It seems that the Grafik Eye DALI is much more intuitive when it comes to moving ballasts from one zone to another, whereas in HWQS it is much harder, and surely it should be the other way around...!

Thank you for your post EBlight.

If they were activated as whole zone, you could deactivate that one zone and then make the change to the zone to break it. If that would not resolve the issue we would need to re do the entire loop. As a quick reference we do have this app note found here at https://www.lutron.com/TechnicalDocu...LI_in_HWQS.pdf that may be helpful!

Thanks Josh - yes as i thought the DALI stuff isnt as advanced as it should be in HWQS yet...

Quote:

---

Originally Posted by Josh R.

Thank you for your post EBlight.If they were activated as whole zone, you could deactivate that one zone and then make the change to the zone to break it. If that would not resolve the issue we would need to re do the entire loop. As a quick reference we do have this app note found here at https://www.lutron.com/TechnicalDocu...LI_in_HWQS.pdf that may be helpful!

---