Yes. I also get email from Control Concepts, they also guide me to blank programming in Lutron keypad, they didn't mention to change Dual Action for...
Hello belshire, welcome to the Forums. There is no way to modify the physical button presses of a Caseta in-wall device via the Lutron App; they will...
Hello Poptop, welcome to the Forums. Below you can find the programming guide for the MS-OPS2H, which will include timeout settings (the options are...
It’s possible that you have two load wires because there may have been a fan light there at one time. You can check this by unmounting you light to...
I'm planning to replace my light switches with Diva Smart Dimmers (DVRF-6L), but first I'm trying to figure out if those switches allow the behavior...
You have to set the button press Fb mode to Actual and make sure you have no programming on the button on the Lutron side. Make it a regular press in...
I have the same issue - photo attached. The light and fan controlled by the switch do not work. It was working for a few days then failed. I took out...
The "processor internal battery" you're referring to is likely the CMOS battery, which maintains BIOS settings and system clock. If it fails, it can...
